|
The Sams Rapid Mixer
Granulator was developed in close co-operation with pharmaceutical
and chemical industry. With the help of RMG wet sifting is generally
no longer necessary. After the mixing of the dry components,
subsequent wet granulation occurs (without transfer of dry mixture)
producing loose granules in RMG. RMG is specially designed to meet
the GMP requirements of the pharmaceutical industry.
WORKING PRINCIPLE
The Sams RMG working
principle is based on 2 decisive factors essential for the mixing
systems.
1. Spinning
close to the bottom of the mixing bowl.
|
 |
|
2. The
impeller sets the entire mixture in a whirling-rising tumbling
motion ensuring a quick and even distribution of all dry components
which leads to an even distribution of all dry components
which leads to an even wetting of every granule. The large lumps
occurred during wet mixing are broken up, by the strategically
located chopping tool rotating at 1440/2880 RPM. The mix can be
discharged with the impeller running through the outlet located on
the side of the mixing bowl flush to the bottom. Easy accessibility
for cleaning is guaranteed by the low profile. The mixing tool is
easily removed from the drive shaft providing an unobstructed mixing
area which may be cleaned very easily. |
 |
CONTROL
PANEL
1. Control
Panel is made up of S. S. sheet metal.
2. It is with special feature DISPLAY SYSTEM and
MICROPROCESSOR with member keys.
3. Display system consists of indicator lamps for compressed
air supply, main motor, chopper motor, bowl lid limit switch and for
closed / open status of discharge valve.
4. In case of insufficient compressed air supply pressure
switch contained in the panel will prevent the machine from
starting.
5. Limit switch is provided on main bowl lid, and discharge
valve, which will de-energise the system when the lid is open. |
| MIXING BOWL
1. Dome
shaped processing bowl which directs loose particles into
whirling motion with the help of impeller.
2. Impeller consists of 2 full and 2 half solid mixing
blades.
3. Inclination of the mixing blades accelerates rising
and tumbling motion of the product in the bowl.
4. Specially designed chopper blades driven at high
speed gives fast and even granulation, throughout the whole
mass in the product bowl.
5. For easy accessibility in cleaning the side
discharge assembly is provided with hinges. |
 |
|
 |
SPECIAL
FEATURES
1. Unit is designed to meet
requirements of GMP.
2. Contact Parts can be SS 304 / 316 quality.
3. Specially designed control panel with display system and
microprocessor.
4. Bowl, lid mixing agitator, discharge housing and all other
contact parts will be of stainless steel. |
|
5. All M. S.
parts of the machine are cladded / covered with stainless steel.
6. Components of the machine are having easy accessibility
for cleaning.
7. All electrical & pneumatic parts are pre-wired to
simplify installation.
8. Limit switch is provided on main lid and discharge valve
for safe operation.
9. Discharge can be provided on either side to suit clients
requirement.
OPTIONS 1.
Machine can be supplied with FLP electrical.
2. PLC can be provided for control panels, which can be
integrated with computer for controlling / recording various
process parameters.
3. A. C. variact.
4. Dust free feeding system.
5. Vacuum drying system.
6. Jacketted vessel for heating or cooling.
7. Binder solution adding and cleaning in place (CIP) in
built. |
